Edit Remote Devices & Commands – Remo+

Edit Remote Devices & Commands

How-to

Remote Devices

Adding a Device

From the Home Screen, select the camera that you want to add the device to (swipe the live feed right or left with your finger and stop on the correct camera)

  1. Press ‘Settings’
  2. On the top of the page, select ‘Remote’
  3. Press the ‘Add’ button , then follow the on-screen instructions

Deleting a Device

From the Home Screen, select the camera that has the device you want to delete (swipe the live feed right or left with your finger and stop on correct camera)

  1. Press ‘Settings’
  2. Select the device you want to delete
  3. Press the ‘Delete’ button located on top right corner of the page

Renaming Devices

Currently, you cannot rename devices that are programmed into your remote. If you would like to rename the device, you will need to delete and re-add the device using the new name.

Remote Commands

Adding Commands

From the Home Screen, go to the camera that has the device you want to edit (swipe the live feed right or left with your finger and stop on the correct camera)

  1. Press ‘Settings’
  2. Select ‘Remote’ located at the top of the page
  3. Select the device that you want to edit (Please note, you cannot add commands to preprogrammed TV’s like Samsung, LG or Sony)
  4. On the following screen press ‘Next’
  5. Then select ‘Add’ and follow the on-screen instructions. You can add up to 4 commands per device.

Deleting Commands

From the Home Screen, go to the camera that has the device you want to edit (swipe the live feed right or left with your finger and stop on the correct camera)

  1. Press ‘Settings’
  2. Select ‘Remote’ located at the top of the page
  3. Select the device that you want to edit
  4. Press the ‘Delete‘ button next to the command you want to delete

Renaming or Editing Commands

Currently, you cannot rename or edit commands you have programmed into your remote. If you would like to rename or edit the command, you will need to delete the command, then re-add the command under the new name.


Older Post Newer Post

Verizon Analytics Code