To reset your RemoBell S, first push the Hex-L key included in the package into the reset hole on the side of the bracket and then hold the reset button on the side of the device for about 5 seconds Once the LED light flashes up and down, your RemoBell W is ready to be reset.
Afterward, open up the Remo+ app, click on Menu icon on the top left corner and select Devices. Press the trash icon in the bottom right corner, select the device you wish to reset, and press "Yes" to delete your RemoBell W.
You will now need to re-register your device on the Remo+ app. Press the plus icon on the bottom left corner to add your device, select "RemoBell W," and choose your time zone.
Switch to your phone’s Wi-Fi settings, leaving Remo app open. Please DO NOT CLOSE THE APP. Connect to the RemoBell W network. You may get a popup message that says "internet not available" or "unsecured network." You can ignore this message.
Once you’re connected to the RemoBell W network, switch back to the Remo app and select your home-wifi network. If you don't see a list of your local networks, you will need to press "continue" at the bottom of the screen. Input your Wi-Fi password, then press Done. You may have to wait up to 3 minutes for RemoBell W to successfully connect to your network.
Once you see the "Successful!" message, your RemoBell W is ready for use!