Help | RemoBell S

All of our devices (except accessories) have a Lifetime Theft Warranty. If your device has been stolen...

    RemoBell S RemoBell W Dimensions 1.8 x 0.84 x 5.1 in 1.7 x 1.1 x 5.4 in Weight 0.29 lbs 0.3 lbs Motion Sensors Video-based PIR-based Digital Chime Not included Included Power 16 - 24 VAC (Existing hardwire installation) 16 - 24 VAC, 10 VA or 12 VDC, 0.5 to 1.0 A (Existing hardwire installation) Security Bank-level data protection Bank-level data protection Viewing Angle 180 degrees (Vertical/Horizontal) 160 degrees (Diagonal) HD Video Yes Yes Resolution 1536 x 1536 1920 x 1080 Wireless IEEE 802.11 b/g/n 2.4 GHz IEEE 802.11 b/g/n 2.4 GHz Operating Temperature 0°F ~ 122°F (–18°C...

While most doorbells can be replaced with the RemoBell S, there are some cases where your existing home wiring may not supply enough power. To address this, you can upgrade your existing transformer to be compatible with the 16-24 VAC needed for your RemoBell S device or have a qualified electrician install it for you. Hardwired transformers can be purchased at most home-improvement or hardware stores.

To reset your RemoBell S, first, remove your RemoBell S faceplate and then press and hold the Reset button located on the body of the device for five seconds. The LED light will flash blue, signaling that your device has now been reset. Afterward, open up the Remo+ app, click on Menu icon on the top left corner and select Devices. Press the trash icon in the bottom right corner, select the device you wish to reset, and press "Yes" to delete your RemoBell S. You will now need to re-register your device on the Remo+ app. Press the plus...

Here are video instructions for installing your RemoBell S.